Installing an HP JetDirect EIO Card
1
Turn the printer off, and disconnect
the power cord.
2
Open the interface cable door by
pressing on the release tabs and
swinging the door outward.
Disconnect all interface cables.
3
Locate the EIO slot. Firmly insert
the HP JetDirect EIO card into the
EIO slot. Twist in the retaining
screws.
4
Attach the appropriate network
cable to the EIO card.
5
Reinstall the interface cable(s) and
the power cord. Reinstall the
interface cable door. Turn the printer
on.
Note
Print a self test/configuration page to
check that the HP JetDirect EIO card
appears as an installed option. See Self
Test/Configuration Page. If this page
does not print in your language, see
Printing Special Pages.
When you print a self test/configuration
page, an HP JetDirect Configuration
page that contains network configuration
and status information will also print.
4
1
3
5
4
2
ENWW